Products You May Like
Amana Tool 57138 1" Round Under Router Bit, 1/2" RadiusRound the lower edge of a counter with the router resting on the upper surface.
Price: $114.26
|
Porter-Cable Professional Power Tools 43913PC Roundover Bowl Bit, CT, 15 Angle, 1" Flute Length, 1/2" ShankPorter-Cable Professional Power Tools 43913PC Roundover Bowl Bit, CT, 15...
Price: $69.13
|
Amana Tool 57124 15° Ogee Undermount Bowl Router Bit, 1/2" RadiusThis bit prepares and/or finishes counter-top edges in conjunction with...
Price: $108.61
|
Porter-Cable Professional Power Tools 43910PC Ogee Bowl Bit, CT, 15 Angle, 3/32" Flute Length, 1/2" ShankPorter-Cable Professional Power Tools 43910PC Ogee Bowl Bit, CT, 15 Angle,...
Price: $69.13
|
Bosch 85660M 2-1/8" Roundover Bowl Bit, 1/2" ShankBosch 85660M 2-1/8" Roundover Bowl Bit, Carbide Tipped
Price: $64.35
|
Freud Tools 85-001 3/4 Round Over Bowl Bit, 1/2 ShankFreud 85-001 3/4" Round Over Bowl Bit, 1/2" Shank. For Various Bowls And...
Price: $82.97
|
Amana Tool 57154 Flush Trim Bowl & Sink Trim Router Bit
Click to enlarge
More images
Click to enlarge
Manufacturer: Amana Tool
Price: $37.32
Product ID : 14257154
Weight: 1.00 lbs
Overview
Trim a sink cutout flush with the bowl in stages using this "overhang" bit.
Purchase
Description
Amana 57154 Bowl & Sink Trim Bit with Ultra Glide Ball Bearing Guide, 2 Flute
Trim a sink cutout flush with the bowl in stages using these "overhang" and flush trim bits in tandem. The overhang bit is equipped with non-marring Ultra-Glide bearings that are tapered to match the slope of the bowl's side. A first pass with the appropriate overhang bit cleans the cutout edge, leaving a very slight overhang at the underside of the counter. A pass with the flush-trim bit completes the operation.
Specification
Trim a sink cutout flush with the bowl in stages using these "overhang" and flush trim bits in tandem. The overhang bit is equipped with non-marring Ultra-Glide bearings that are tapered to match the slope of the bowl's side. A first pass with the appropriate overhang bit cleans the cutout edge, leaving a very slight overhang at the underside of the counter. A pass with the flush-trim bit completes the operation.
Specification
- D - Cutting Diameter:3/4"
- B - Cutting Length:1"
- aº - Bevel Angle:0º
- Tool No.:57154
- d - Shank Diameter:1/2"
- L - Overall Length:3-1/2"
- Description:Flush trim
- Replacement Bearing Assy.:47709
Comment on Facebook