Amana Tool 55350 Ogee Reversible Stile & Rail Cutter Assembly

Amana 55350 Ogee Reversible Stile & Rail Assembly with Ball Bearing Guide, 2-Wing, 3/4" Material

Cut both the rails and stiles with a single economical assembly. Switch from the stile cut to the rail cut simply by rearranging the cutters and bearing on the arbor. Because the profile and the cope are cut with the same cutter, you get a perfect fit. Use in a table-mounted router. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles.

Specification

• D - Cutting Diameter:1-5/8"
• Pattern Type:Ogee
• A' Reveal:3/8"
• Tool No.:55350
• B1 - Cutting Length:11/16"
• B2 - Cutting Length:7/8"
• d - Shank Diameter:1/2"
• L - Overall Length:3"

Individual Components:

• Order #:Description
• 55352:Ogee profile cutter
• 55354:1/4" groove cutter
• 47708:Ball bearing
• 47612:1/2" shank arbor with nut
• 55356:.05mm shims (3 required)
• 55357:.10mm shims (3 required)
• 55402:1.0mm washers (2 required)

Use in a table-mounted router. Not for use in a handheld router!