Amana Tool 54119 Cove Raised Panel Router Bit, 1-7/16" Reveal

Amana 54119 Cove Raised Panel Bit, 2 Flute with Ball Bearing Guide

Raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with a raised-panel bit. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel groove in the frame members. The profile contour and the reveal width varies. Bit has a 1/2" shank. Must be used in a table-mounted 3+ horsepower router and run at reduced speed. Use this bit for panels with curved edges. Multiple passes recommended.

Specification

• D - Cutting Diameter:3-3/8"
• *'A' - Reveal:1-7/16"
• R - Radius:1-9/16"
• Tool No.:54119
• B - Cutting Length:1/2"
• d- Shank Diameter:1/2"
• L - Overall Length:2-3/8"
• Type:Cove
• Replacement bearing #:47706

Use in a table-mounted router. Not for use in a handheld router!

Warning:Maximum RPM 14,000

Note:Reveal (*'A') reflects total length of cut. Therefore, you must deduct 3/8" (usually) for allowing the panel to recess into the frame.