Products You May Like
Porter-Cable Professional Power Tools 43154PC Plunge Raised Panel Bit, CT, 1-1/8" Cut Width, 1/2" ShankPorter-Cable Professional Power Tools 43154PC Plunge Raised Panel Bit, CT,...
Price: $34.21
|
Freud Tools 99-523 3-1/2" Quadra-Cut Raised Panel Bits 1/2" ShankFreud Tools 99-523 3-1/2" Quadra-Cut Raised Panel Bits 1/2" Shank
Price: $93.97
|
Bosch 85641M 3-3/8" Cove Raised Panel Cutter, 1/2" ShankBosch 85641M 3-3/8" Cove Raised Panel Cutter, Carbided Tipped
Price: $128.62
|
Amana Tool 54121 Ogee Raised Panel Router Bit, 1-7/16" RevealRaised panels for cabinet doors, frame-and-panel furniture, and architectural...
Price: $100.73
|
Bosch 85583M 1-5/8" Raised Panel Bit with Bearing, 1/2" ShankBosch 85583M 1-5/8" Raised Panel Bit with Bearing, Carbided Tipped.
Price: $39.17
|
Freud Tools 99-512 2-3/4" Quadra-Cut Raised Panel Bits 1/2" ShankFreud Tools 99-512 2-3/4" Quadra-Cut Raised Panel Bits 1/2" Shank
Price: $98.97
|
Amana Tool 54118 Ogee Raised Panel Router Bit, 1-1/16" Reveal
Click to enlarge
More images
Click to enlarge
Manufacturer: Amana Tool
Price: $76.19
Product ID : 14254118
Weight: 1.00 lbs
Overview
Raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with a raised-panel bit.
Purchase
Description
Amana 54118 Traditional Raised Panel Bit, 2 Flute with Ball Bearing Guide
Raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with a raised-panel bit. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel groove in the frame members. The profile contour and the reveal width varies. Bit has a 1/2" shank. Must be used in a table-mounted 3+ horsepower router and run at reduced speed. Use this bit for panels with curved edges. Multiple passes recommended.
Specification
Raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with a raised-panel bit. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel groove in the frame members. The profile contour and the reveal width varies. Bit has a 1/2" shank. Must be used in a table-mounted 3+ horsepower router and run at reduced speed. Use this bit for panels with curved edges. Multiple passes recommended.
Specification
- D - Cutting Diameter:2-5/8"
- *'A' - Reveal:1-1/16"
- R - Radius:3/4"
- Tool No.:54118
- B - Cutting Length:5/8"
- B1 - Cutting Length:5/16"
- d - Shank Diameter:1/2"
- L - Overall Length:2-1/2"
- Type:Ogee
- Replacement bearing #:47706
Use in a table-mounted router. Not for use in a handheld router!
Warning:Maximum RPM 20,000
Note:Reveal (*'A') reflects total length of cut. Therefore, you must deduct 3/8" (usually) for allowing the panel to recess into the frame.
Comment on Facebook