Products You May Like
Bosch 85583M 1-5/8" Raised Panel Bit with Bearing, 1/2" ShankBosch 85583M 1-5/8" Raised Panel Bit with Bearing, Carbided Tipped.
Price: $39.17
|
Porter-Cable Professional Power Tools 43527PC Horizontal Panel Raiser Bit, Traditional, CT, 3-1/2" Dia., 1/2" ShankPorter-Cable Professional Power Tools 43527PC Horizontal Panel Raiser Bit,...
Price: $94.07
|
Porter-Cable Professional Power Tools 43154PC Plunge Raised Panel Bit, CT, 1-1/8" Cut Width, 1/2" ShankPorter-Cable Professional Power Tools 43154PC Plunge Raised Panel Bit, CT,...
Price: $34.21
|
Bosch 85637M 2-3/4" Raised Panel Cutter, 1/2" ShankBosch 85637M 2-3/4" Raised Panel Cutter, Carbided Tipped
Price: $84.80
|
Freud Tools 99-523 3-1/2" Quadra-Cut Raised Panel Bits 1/2" ShankFreud Tools 99-523 3-1/2" Quadra-Cut Raised Panel Bits 1/2" Shank
Price: $93.97
|
Freud tools 99-516 3-1/2" Quadra-Cut Raised Panel Bits 1/2" ShankFreud tools 99-516 3-1/2" Quadra-Cut Raised Panel Bits 1/2" Shank
Price: $104.47
|
Amana Tool 54117 Traditional Raised Panel Router Bit, 1-7/16" Reveal
Click to enlarge
More images
Click to enlarge
Manufacturer: Amana Tool
Price: $130.69
Product ID : 14254117
Weight: 1.00 lbs
Overview
Raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with a raised-panel bit.
Purchase
Description
Amana 54117 Traditional Raised Panel Bit, 2 Flute with Ball Bearing Guide
Raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with a raised-panel bit. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel groove in the frame members. The profile contour and the reveal width varies. Bit has a 1/2" shank. Must be used in a table-mounted 3+ horsepower router and run at reduced speed. Use this bit for panels with curved edges. Multiple passes recommended.
Specification
Raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with a raised-panel bit. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel groove in the frame members. The profile contour and the reveal width varies. Bit has a 1/2" shank. Must be used in a table-mounted 3+ horsepower router and run at reduced speed. Use this bit for panels with curved edges. Multiple passes recommended.
Specification
- D - Cutting Diameter:3-3/8"
- *'A' - Reveal:1-7/16"
- aº - Bevel Angle:15º
- Tool No.:54117
- B - Cutting Length:1/2"
- B1 - Cutting Length:5/16"
- d - Shank Diameter:1/2"
- L - Overall Length:2-3/8"
- Type:Traditional
- Replacement bearing #:47706
Use in a table-mounted router. Not for use in a handheld router!
Warning:Maximum RPM 14,000
Note:Reveal (*'A') reflects total length of cut. Therefore, you must deduct 3/8" (usually) for allowing the panel to recess into the frame.
Comment on Facebook