Products You May Like
Amana Tool 47101 3/8" Flush Trim Router Bit w/Ball Bearing Guide Double FluteUse a flush trimming bit for laminate work or for template and pattern work.
Price: $21.21
|
Amana Tool 47111 1/2" Dynabit Laminate Trim Bit w/Ball Bearing GuideUse this bit for template or pattern work where the workpiece is unusually...
Price: $19.80
|
Freud tools 48-112 5/8" Flush Trim V Groove Bit, 1/2" ShankFreud 48-112 5/8" Carbide Tipped Flush Trim V Groove Bit, 1/2" Shank. For...
Price: $29.97
|
Amana Tool 47116 1/2" Flush Trim Bit w/Ball Bearing Guide, 3 FluteUse this bit for template or pattern work where the workpiece is unusually...
Price: $21.21
|
Freud Tools 44-102 1/2 "Bearing Flush Trim Bit, 1/4" ShankFreud Tools 44-102 1/2" Carbide Tipped Bearing Flush Trim Bit, 1/4" Shank....
Price: $24.47
|
Freud Tools 44-104 1/2 "Bearing Flush Trim Bit, 1/2" ShankFreud Tools 44-104 1/2" Carbide Tipped Bearing Flush Trim Bit, 1/2" Shank....
Price: $26.47
|
Amana Tool 47120 1/2" Flush Trim Bit w/Ball Bearing Guide, 3 Flute
Click to enlarge
Manufacturer: Amana Tool
Price: $19.31
Product ID : 14247120
Weight: 1.00 lbs
Overview
Use this bit for template or pattern work where the workpiece is unusually thick.
Purchase
Description
Amana 47120 Flush Trim Router Bit with Ball Bearing Guide, 3 Flute
Use a flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top.
For an extremely smooth finish, choose the three-flute configuration. It is expecially good to use on laminates that tend to chip easily.
Specification
Use a flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top.
For an extremely smooth finish, choose the three-flute configuration. It is expecially good to use on laminates that tend to chip easily.
Specification
- D - Cutting Diameter:1/2"
- B - Cutting Length:1/2"
- Tool No.:47120
- d - Shank Diameter:1/2"
- L - Overall Length:2-5/8"
Comment on Facebook