Amana Tool 55392 Finger Joint Assembly, 1/2" Shank

Amana 55392 Finger Joint Assembly, 2-Wing with Ball Bearing Guide

Ideal for joining wood end-to-end as well as edge-to-edge, the finger joint can be routed quickly and accurately with this tool. Rout one workpiece face up, the other face down. When the bit height is correct, the two pieces should slide together with their faces perfectly flush. The assembly includes five 2-wing finger cutters, one 2-wing straight cutter, a ball bearing guide, a 1/2" shank arbor, shims, spacers, and washers. The number of finger cutters used varies with the stock thickness; it can handle stock between 7/16" and 1-3/8" thick. Full instructions for setup and use are included. For best results, run at full speed in a 1-1/2 horsepower table-mounted router.

Specification

• D - Cutting Diameter:1-9/16"
• B - Cutting Length:1-3/8"
• Tool No.:55392
• d - Shank Diameter:1/2"
• L - Overall Length:3-3/4"

Individual Components:

• Order #:Description
• 55394:Finger cutter (5 required)
• 55396:Straight cutter (1 required)
• 47736:Ball bearing (5/16" x 28mm)
• 47620:1/2" shank arbor with nut
• 55367:3.4mm spacers (7 required)
• 55368:6.0mm spacer (1 required)
• 55357:0.1mm shims (10 required)
• 55404:0.5mm shim (1 required)
• 55402:1.0mm washers (2 required)

Use in a table-mounted router. Not for use in a handheld router!